Why isn’t my Thermostat Working?
So you’ve decided to replace the thermostat batteries and you’ve bumped the temperature up a couple of degrees; but your home is still cold. At this point, you may be wondering why your thermostat still isn’t working. There are a number of causes for this, but before you check anything else, there is one thing you need to know: the most common reason is that there is still no power. The mercury switch in your thermostat controls whether or not electricity flows through the heater coil. This means that if the power isn’t on, nothing will happen when you bump up the temperature on your thermostat. If you’re experiencing a power outage, or if your home has a wiring issue, this could be why your thermostat is not working. And, if all else fails, you may need to start worrying about furnace repair or replacement. If you want to learn more about Furnace installation Near Me in Lake Elmo MN, then reach out Rumpca Services today. Before you start worrying about replacing your furnace, let’s go over some more reasons why your thermostat might not be working.
Your thermostat may need to be reset
If your thermostat refuses to change the amount of heating or cooling in your home, this may be a sign that it needs to be reset. If you have a digital thermostat, look for the “reset” button on the back of the device. If your thermostat is an older model, you can usually find instructions on how to reset it in its user manual. If you have a programmable thermostat, you may need to go into the settings and change the time. If your thermostat has a manual mode, then this is probably what’s causing it not to work properly. If you notice that your thermostat is not responding to changes in the temperature, it may need to be reset. The easiest way to do this is by using a small screwdriver or a coin and turning it counterclockwise until you hear two clicking sounds. Once you’ve done that, try adjusting the temperature again.
Your thermostat may need a new set of batteries
While it may seem like the most obvious answer to some, it is still worth checking that your thermostat doesn’t need new batteries. If your thermostat has no power, then it will not be able to work properly. There are a few different ways that you can check this. The first thing to do is remove the batteries from the back of the device and replace them with new ones if necessary. If this doesn’t help, then you may need to call an HVAC technician out to fix your problem for you. There is a chance that your thermostat isn’t the problem at all, but that your home is experiencing a deeper heating issue. If this is the case, a furnace contractor can come to your home and inspect your entire heating system to find the source of the problem.
Your thermostat may not be correctly programmed
Even if your thermostat is set to the correct temperature, it may not be programmed correctly for your home. You can usually find this information on the back of your unit or in its instruction manual. If you are unsure about how to program it, call an HVAC technician out to help with this issue as well. There is also a chance that your thermostat isn’t working correctly because of something else, such as a power surge or some other electrical problem.
Your thermostat may have been installed incorrectly
If your thermostat is not working and you have a new one, it’s possible that the problem lies in how it’s wired up. The easiest way to tell if this is the case is to unplug your heater and plug it back in again. Often times, this will reset the system so that everything starts working properly again.
You have a problem with your furnace
There is the chance that if none of the issues above apply to your thermostat that you may instead have a problem with your home’s furnace. If this is the case, it’s probably best to call a professional. A furnace repair technician can come out and diagnose any issues and make sure that your heater is operating as it should be. In addition, they’ll be able to help you install a new furnace into your home if the old one is in need of replacement.
If you are still unsure about where to turn for help, don’t worry! At Rumpca Services, we are always here for you and would love to hear from you if you need any assistance with any kind of HVAC or Furnace problem. Just give us a call at 651-459-2896 or visit our website at rumpcaservices.com. At Rumpca Services, we’re always happy to help you with your Heating, Furnace Repair, Air Conditioning Installation, Air Conditioning Repair, Indoor Air Quality, Duct Cleaning, Plumbing Installation and Repair, Sewer Drain Cleaning, and more!